FiberLaunch CC2-SM-150 9/125 150m SM Fiber Launch Cable SM 150 SC/APC To SC/APC

Description

FiberLaunch CC2-SM-150 9/125 150m SM Fiber Launch Cable SM 150 SC/APC To SC/APC.
Seller Refurbished tested fully functional
60 Day Warranty Return
(USA buyers Only)
http://www.fiberlaunch.com/
FIBERLAUNCHâ„¢ Standard
The FIBERLAUNCH Standard is cost effective and with its non armoured launch cables ready for reassemble the connectors after damage or losing loss quality
Standard length: 500m, 1000m Connectors: SC, LC, FC-PC, E-2000, ST also all in APC Cables: not armoured, >150cm length, Attenuation: < 0,15dB/connector
Specifications
Corning SM 28E ULTRA
ITU-T G.652.D and ITU-T G.657.A1 compliant
Recommendation G.657.A1 standard
Recommendation G.652 (Tables A, B, C and D)
IEC Specifications 60793-2-50 Type B1.3
TIA/EIA 492-CAAB
Telcordia Generic Requirements GR-20-CORE
ISO 11801 OS2
typ. attenauation -0,3dB/km at 1310nm
FIBERLAUNCH
™ – the revolution
From now on connecting the launch cable between the OTDR measurement and the fibres you have to test will be more efficient, secure and above all extremely fast and easy.
Especially for FTTH installations an increasing amount of connectors have to be measured on very different spots and locations
Therefore it is becoming more and more important to use a robust, handy and easy-to-use launch fibre
Application
FTTH / FTTx
Especially in the fast growing „fibre to the home“ market it is neccesary to make a lot of measurements a day. There is only one fibre ending at each location. So you have to prepair the OTDR and the launch cable a lot of times. According to our test and experiences this can save you up to 3 minutes per measurement. With 20 measurements that could save you up to one hour of time, technical and human resources per day.
Telecom WAN, MAN
In this market everyone cares about low losses and high quality connetions. You can not install high quality splice connections and use a not HQ fiber launch cables for measuring. Your work (measurement of splice) seems bad althought only the connector or the fibre of your launch cable is not good enough. Also the return loss plays a impotant role, especially after houndreds of mating cycles. If your launch cable looses quality your measurement loose too.
Field Installation
FIBERLAUNCH is extremely handy! This will be very helpful if you have to deal with several devices at once. (E.g. splice device, measuring device, assembly tools). You do not even have to carry a box or a case, you simply fix the FIBERLAUNCH at your belt or use the carabiner to fix it at a piece of equipment and both of your hands will be available. This will help you especially at difficultly approachable areas or packed spaces.
High safety/reliability
Additional to the fully automated unwind-mechanism of our FIBERLAUNCH one can stop and fix the fibre accordingly. You don’t have to take care anymore or waste your time while carefully winding or unwinding the cable by hand. As the unwinding the winding of the cable is automated as well and protects the highly sensitive fibres. Therefore fibres can hardly be buckled or broken anymore and additional safety comes through the steel stiffener.
The FIBERLAUNCHâ„¢ is a real high-end device!
FIBERLAUNCH™ – quality
If you opt for a FIBERLAUNCH you will have decided for a product of highest quality and efficiency standards.
The
FIBERLAUNCH
Standard is produced with Corning fibres and best Quality standard connectors.
Our
FIBERLAUNCH
HQ
is a high-end product with best Corning fibres and certified 0,1dB HQ Connectors for high-level proficiency.
With
FIBERLAUNCH HQ
we deliver, a detailed measurement protocol (IL, RL, summary) for each connector is enclosed.
The cables of our
FIBERLAUNCH
HQ
with the assembled connectors are steel armoured and as a matter of fact nearly undestroyable.
The housing is designed out of unbreakable synthetic material and additionally hard-faced with anodised disks.
The connectors are protected and covered by an utterly save aluminium cap that can be removed for matters of measuring. Therefore fibre and connectors are always safely stored and protected – even on the go or during transportation.
So, we utilize the best of all materials, fibres and connectors.
All that in combination with a unique and patented mechanism, produced and assembled in Europe under extremely high quality standards – it will not only fit to your needs, it will simply leave no room for further desires.
FIBERLAUNCH™ – advantages
Steel armoured:
Launch fibres are generally highly sensitive. To remove and cope with this problem we are only utilizing steel armoured cables for our FIBERLAUNCH. Therefore fibres can hardly be buckled or broken.
Small and light:
Our FIBERLAUNCH contains the customary amount of 1000m optical fiber and is still extremely small and flat. For additional protection we use a robust housing made out of unbreakable synthetic material.
Closable:
As additional feature we equipped FIBERLAUNCH with a special fastener to screw up the device. This makes the connectors even more save and splash guarded.
High usability:
Additional to the easy unwind-mechanism of our FIBERLAUNCH one can stop and fix the launch cables accordingly. The winding of the cable is automated and protects the highly sensitive fibres.
Above all the FIBERLAUNCH can be moved, fixed or attached nearly everywhere through innovative belt-clip or special attached carabiner.
High time and cost saving:
You will find out, that your assembly troop will be much more satisfied and will work even more effective than before. According to our test and experiences this can save you up to 3 minutes per measurement. With 20 measurements that could save you up to one hour of time, technical and human resources per day.
Additionally through the high quality of our product and the special protection-mechanism for the fibre you can also increase your failure safety and reliability at fittings abroad.
http://www.fiberlaunch.com/