4 Axis CNC Offline Controller Control Stepping Servo Numerical Control XC609DD*

Description

Description
4 Axis CNC Offline Controller Motion Control Stepping Servo Numerical Control w/3.5" LCD XC609DD
Description:
XC609DD numerical control system is perfect for boring, drilling, milling and engraving. With 32-bit high-performance microprocessor, it features real-time multi-task control technology. It is designed with hardware interpolation technology, full linkage, and high-speed algorithm for small lines. Its interpolation accuracy is accurate as 0.001mm, and its speed is 12m/min.
Features:
- Based on 32-bit microprocessor, it supports full linkage and 0.001 mm interpolation accuracy, working at the speed of 12m/min.
- 3.5-Inch Color LCD: 480 x 320 resolution. Equipped with 5 softkeys, it is easy to learn and operate. It offers rich display interfaces for parameter classification, alarm log, system diagnosis and the like. It facilitates debugging and maintenance.
- Using standard G instruction which is compatible with FANUC system instruction.
- 40 kinds of G command codes support cyclical drilling.
- Supports teach-in function.
- Supports tool auto-checking instrument.
- Full screen editing of program for your parts. Built in 256M memory for storing N pieces of parts programs.
- USB Interface: Support reading, writing, data backup and direct processing for your  U disk file. (DNC)
- I/O 24/24: It is flexible to use, for its I/O ports can be expanded to 96/96.
- Two Languages: Chinese and English operation interfaces for convenient operation.
- Adopts advanced algorithm for small lines, processing stably.
- Supports fast operation in specified position and multi-coordinate system (automatically saving after power down).
- Supports saving break-point function: It will automatically save by pressing the PAUSE button during operation or after powering off.
- Supports multi-level operation authorization for easy management, featuring time-limited system locking function.
- Supports for G code files of third-party software, including UG, Mastercam, PowerMill, FeatureCAM, ArtCAM, JDPaint, Wentai.
Technical Specifications:
Basic Functions:
- Number of Controlled Axes: 4-Axis(X, Y, Z, A)
- Number of Linkage Axes: Full Linkage
- Analog Spindle: 1
- Spindle Rate: 10% to 150%
- Minimum Instruction Unit: 0.001 mm
- Maximum Instruction Value: ±99999999 x Instruction Unit
- Fast Feed Speed: 12,000mm/min
- Rate of Feed: F0, 25%, 50%, 100%
- Cutting Feed Rate: 12,000mm/min
- Feed Speed Rate: 10% to 150%
- Electronic Gear Ratio: 1-65535:1-65535
- Automatic Acceleration & Deceleration: Yes
- Location: G00 (Linear Interpolation Location)
- Interpolation: Linear (G01), Circular (G02/G03/G12), Spiral-line Interpolation
- Returning to Reference Point: Automatically (G28)
- LCD: 3.5-inch TFT LCD screen with resolution of 480 x 320
- MDI Softkey: 5
- Step Feed Amount: x1, x10, x100
- Communications Interface: U disk interface
- External Handwheel Interface: Yes
- I/O Interface: 24/24 (Extensible to 96/96)
- Pause (seconds): Yes
- Accurate Stop Status: Yes
- Accurate Stop: Yes
- Storage Travel Checking: Yes
- MDI Running: Yes. It supports multi-segment operation
- Reset: Yes
- Jump Switch: Yes
- Single Block Operation: Yes
- Program Protection Switch: Yes
- Self-diagnostic Function: Yes
- Emergency Stop: Yes
- Power Supply: Single-phase AC220V+10%-15%, 50Hz±1Hz. DC24V/1A
- Coordinate Systems: Machine Coordinate System (G53), Workpiece Coordinate System (G92, G54-G59), Local Coordinate System (G52), Plane Designation of Coordinate System
- Automatic Coordinate System Setting: Yes
- Decimal Point Input: Yes
Auxiliary Function:
- Auxiliary functions: M2 digits, M code customization, manual/MDI/automatic control of spindle forward, reverse and stop; control of lubrication to start and stop, etc.
Spindle Functions:
- Spindle Function: Analog Spindle (0-10V)
Editing Operation:
- Editorial Functions: Parameters, Diagnostic Bit Input, Program Editing, MDI Multi-segment Execution
- Storage Capacity: 256M
- Number of Stored Programs: N pcs
- Display of Program Names: Chinese, English, Numbers, and Combinations
- Looking for Program Lines: Yes
- Skip Optional Program Segment: Yes
- Program Switch: Yes
Display:
- Displayed Language: Chinese, English
- Processing Time & Number of Parts: Display
- Spindle Speed, M/S Instruction: Yes
Package Included:
- 1 x XC609DD 4-Axis CNC Offline Controller
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.